If you’re looking for an easy way to update your home, try hanging peel and stick wallpaper. This type of wallpaper is much easier to apply than traditional wallpaper and can make a room look fresh and new.
First, you will want to prepare the wall for papering. This includes removing the faceplates from electrical outlets and light switches.
Gather Your Tools
Unlike traditional pasted wallpaper, which is best left to the pros, peel-and-stick wallpaper can be done by almost anyone. It’s the perfect option for renters and fickle decorators, but even so, it’s a little trickier than traditional wallpaper to hang perfectly.
Start by making sure your walls are clean and free of dust, dirt, grease and oil. Wipe down any outlets and switches as well to prevent them from coming off in the process. If you’re planning to use a ladder, be sure it’s stable and wear clothes that make it easier to maneuver up and down, like long pants with pockets or an apron. Get more info on this wallpaper singapore website.
Once you’ve peeled back the top and stuck down your first strip of wallpaper, line up the pattern. Overlap the next drop slightly with the first one and smooth it out carefully, piercing any stubborn bubbles with your squeegee as you go. Continue this pattern throughout your room. When you get to the bottom, trim any excess wallpaper with your utility knife.
Measure the Wall
The first thing you’ll want to do is prepare the walls for wallpaper. That includes cleaning them, removing outlet and switch covers, and moving furniture.
Next, you’ll want to measure your space to determine how much wallpaper you need. To do that, measure the height and width of your room and add those numbers together. Be sure to account for any doors and windows you’ll be leaving in place as you will need to subtract them from your final measurement.
When you’re ready to start hanging your wallpaper, begin in a prominent spot and use a level to draw a light vertical line on the wall. This will serve as your guideline as you continue to hang each strip. Before applying the first strip, peel off about 12 inches of the paper backing and then apply it to the wall, lining it up with your plumb line as you go. Then smooth it down and around the chair rail or baseboard if you have one.
Cut the Wallpaper
First, you want to make sure the wall is level by running a level along the ceiling and/or corner of the room. Now that you know the wall is level you can begin removing the wallpaper from its backing and sticking it to the wall. Start in one upper corner and slowly work your way down the wall. If you are going to be putting up wallpaper in a dorm or rental property save the backing that you peel off of each strip so that you can use it to cut your next length of wallpaper.
When you reach an inside corner, trim the wallpaper so that about 1/2 inch wraps to the adjacent wall. This will prevent the seam from showing. Repeat this process until you have hung all of the wallpaper. If you run into any problems, like the pattern not lining up, simply peel back and realign the wallpaper. It is much easier than you might think!
Hang the Wallpaper
Unlike traditional wallpaper paste, peel-and-stick doesn’t require any messy glue. This makes it a great choice for renters or anyone who’d rather avoid the mess of traditional wallpaper but still wants to hang a beautiful new wallcovering in their space.
Before beginning the project, make sure that your walls are clean and that any furniture is moved away from the wall so you can get to work. You’ll also want to wipe down your baseboards and reinstall the faceplates on electrical outlets and switches.
Once your wall is prepped, it’s time to start hanging your peel-and-stick wallpaper. Start by making a grid with painter’s tape across your wall. This doesn’t have to be perfectly straight but should mark the area you will be adhering your wallpaper to. Use a level to be sure the grid is completely even before proceeding.
